home *** CD-ROM | disk | FTP | other *** search
- SCHEDULE EASE
- "The Complete Schedule Management System"
-
- (C) Copyright 1992
- Jon F. Reynolds
- Computer Specialties
- 3913 Heritage Hill
- San Antonio, Texas 78247
-
- ----------------------
- **********************
- ----------------------
-
- Schedule Ease is the most comprehensive and easy to use scheduling
- software available. It is the only product of its kind available
- either commercially or through shareware. Since Schedule Ease
- is much larger than will fit onto a 360k 5.25 inch floppy disk,
- it is in compressed form, employing the (c)LHARC data compression
- utility.
-
- Before decompressing the files, you should make a copy of the
- diskette for backup purposes. To decompress the files, simply copy
- the files from the Schedule Ease distribution diskette to the drive where
- the program is going to reside. This is usually to a hard drive, although
- it is possible to decompress the files onto either a 720k or larger 3.5 inch floppy drive or 1.2 meg
- or larger 5.25 inch floppy drive.
-
- ----------------------
- **HARD DRIVE SYSTEMS**
- ----------------------
-
- On a hard drive system, make certain you are at the system prompt and
- create a directory for the Schedule Ease program files by typing:
-
- c:\md Schease
-
- Then, change to the Schedule Ease directory by typing:
-
- c:\cd c:\Schease
-
- Place the program distribution diskette into your A:\ drive and type:
- (Substitute b:\ for a:\ if you are installing from the b drive)
-
- c:\Schease\copy a:\*.* c:
-
- From the directory prompt issue the command to run the decompression
- program:
-
- c:\Schease\program
-
- ----------------------
- *FLOPPY DRIVE SYSTEMS*
- ----------------------
-
- When decompressing the program files on a floppy based system, simply
- copy the files from the Schedule Ease program diskette to the floppy drive
- to which it is to be decompressed. For example, if the A:\ drive is the
- 360k drive containing the program diskette, place a blank formatted floppy
- diskette into the B:\ drive and, at the A:\ prompt type:
-
- a:\copy *.* b:\
-
- When the files are finished copying, change to the B:\ drive and issue
- the command to run the decompression program:
-
- b:\program
-
-
- -----------------------
- **RUNNING THE PROGRAM**
- -----------------------
-
- Once the files are decompressed, there will be two program files on the
- drive: Schease.exe and Schease.wkb. The compressed file, Program.exe,
- should be deleted to conserve disk space by issuing the command:
-
-
- c:\Schease\del program.exe
-
-
- If you are running the program from a drive other than c:\, substitute
- the proper drive letter in the above commands from the directory in which
- the program files reside. For example, if you are running from a floppy
- disk in the B:\ drive with no directories, simply type:
-
-
- b:\del program.exe
-
-
- Once the program has been decompressed and installed on your computer
- it is started by typing: Schease from the directory prompt. Example:
-
- c:\Schease\Schease
- or
- b:\Schease
-
- The opening screen of Schedule Ease is the first page of the documentation
- section. Not only will it supply comprehensive explanations of the
- program's features, but also contains important information regarding
- the science (or art) of scheduling and registration of Schedule Ease.
-
-
-